Primevolve 1500W Ceramic Electric Space Heater with Remote
About this item
- 2S instant heating: Powerful 1500W PTC ceramic element enables this tower space heater to heat up 300 sq.ft in 2 seconds. E.T.L. listed. With 2 heat settings (high 1500 watts / low 900 watts), plus a thermostat-controlled setting, suitable for warming up spaces including basements, garages, living rooms, offices, dorms, hot yoga studios, etc
- 90°widespread oscillation and remote control. This ceramic heater can rotate from side to side to generates 90 degrees of widespread warmth, keeping your large room cozy and comfortable all the time. It comes with a remote controller( need 2*AAA batteries, not included), remotely control the heat and oscillation settings from your bed or sofa.
- Qualified safety. Made of V0 flame-retardant materials with multiple safety features including 15°tip-over protection, built-in overheat protection( shut off automatically when reached 242.6°F), V0 flame retardant 2-prong plug, and sturdy 5.9ft long flat power cord. Worry-free all-day use.
- 9 hours timer & reservation and low noise. Lower than 45dB level, this indoor space heater is comfortably quiet to use in a bedroom while sleeping. Timer set gives you 9 hours of good sleep or deep nap, suitable for warming the room while reading, working, studying, or watching TV.
- Warm Tips: there is 30 seconds countdown delay after it is turned off because the fan keeps working for a while to dissipate heat, for extending the life of your heater. Please use the remote control aim at the front of the heater in order to make it receive orders from the remote quickly.
1pc* PTC Ceramic Fan Heater
1pc* Remote Control(Batteries not included)
1pc* Instruction manual
How does AI Mode work
The heater will adjust working status based on the room temperature, for saving energy.
1. If room temperature > (setting temperature+3℉), the heater will lower the working heat.
2. If room temperature < (setting temperature-3℉), the heater will increase the working heat.
There are 30 seconds countdown delay after it is turned off because the fan keeps working for a while to dissipate heat, for extending the life of your heater.
There may be a trace of odor when the unit is first operated. This is safe and please do not worry. Just let it operate for a while to evaporate and this should not re-occur.
The air outlet is a little hot during use because the ceramic heating element helps to heat faster and offer more energy, so please DO NOT touch the air outlet during use.
Please use the remote control aimed at the front of the heater in order to make it receive orders from the remote quickly.
|Main material:||VO flame-retardant materials|
|Product size:||18.05*7.5*7.5 in|
|Package size:||19.7*8.66*8.66 in|
|Power cord length:||5.9ft(1.8m)|
|Net weight of single product:||6.17lbs(2.8kg)|
|Control method:||remote & touch panel|
|Air supply principle:||air circulation|
|Wind mode:||Fan gear: cold wind; Low gear: 900W wind; High gear: 1500W wind|